AUTONET TV

The KPS Princeton Garage Guide to Proper Fluids for Your Vehicle

The automotive professionals at KPS Princeton Garage would like to give Princeton drivers an update on some of the things happening in automotive fluids. You know, vehicles are becoming more sophisticated every day.  Fluids such as, oil, coolant and transmission fluid are becoming more specialized at about the same pace.

The Princeton do-it-yourselfer has to be pretty careful so that they do not actually harm their vehicle with the wrong type of fluid. That is why so many NJ ] owners rely on the advice of their friendly and knowledgeable KPS Princeton Garage service advisor to not only get the correct family of fluids, but to suggest the formulation that is best for their vehicle and their driving habits in the Princeton area.

Let's start with engine oil. Princeton drivers who have been paying attention will have noticed a number of new oil weights on the NJ scene in the last several years. Modern engines are built to much tighter tolerances and have very complicated valve trains. The oil must be thin enough to lubricate complicated parts when the engine is cold. The weight of an oil is expressed in terms like 20-W-50 or 5-W-30. The vehicle manufacturers recommend the weight of oil for each vehicle they make. The recommendation is based on engine design. Your Princeton service center will know what weight your vehicle manufacturer recommends - and it's important to follow those recommendations. Your service advisor at KPS Princeton Garage can also offer suggestions for special formulations and can tell you all about conventional and synthetic oils.

Antifreeze, or engine coolant, is another area that has become more complicated. For a long time, vehicle manufacturers only recommended a couple of different types of coolant. Now, several different formulations are needed because of the high-tech materials that vehicle manufacturers are using to build the cooling system. Using the wrong type of coolant in your vehicle can actually void your warranty, so it's important to get that right.

Transmission fluid is becoming specialized for Princeton vehicles as well. New transmission designs have particular requirements that require specific formulations. Recently, new, somewhat confusing, standards for brake fluid have also been released.

Not too long ago, there was a good chance that all of the vehicles at your house would use many of the same fluids. However, as automotive technology advances, the array of basic automotive fluids NJ drivers need will grow. And, some of the formulations will cost a little more for Princeton drivers. Fortunately, KPS Princeton Garage will continue to update their training to keep pace with technology so that you'll get the right fluids your vehicle needs. It's all part of the commitment we make to your driving peace of mind.

 KPS Princeton Garage
3860 NJ-27
Princeton, NJ 08540
732-297-9515

Restore Your Get-Up-and-Go (Fuel and Air Induction Cleaning)

You may have heard the old saying, "My get-up-and-go got up and went." If your vehicle's engine's fuel economy is noticeably worse, your engine is idling roughly or stalling or your vehicle's acceleration isn't what it used to be, ask your service advisor if you might need your vehicle's fuel and air induction systems cleaned.

As the hours pile up on your engine, carbon deposits can build up.  It's not unusual for some of the impurities and additives in fuel to leave behind a black residue that eventually will negatively affect your fuel economy and performance. Maybe you're noticing your engine is harder to start, you hear knocking or pinging in your engine and your vehicle just doesn't have the pep it used to.

While it's a sophisticated process with a lot of components, a gasoline engine essentially produces power by drawing in air from the outside and mixing it with fuel in the cylinders where this blend of fuel and air is ignited by spark plugs in synchronized explosions.

The fuel and air enter your engine through the fuel induction system and air induction system. Because of things like high operating temperatures and impurities, carbon in the fuel can leave behind dark, sooty deposits in the fuel induction system such as the fuel injectors and the throttle body. These and other residue reduce your engine's efficiency and performance. Our service center can use special fuel injector cleaners to remove those deposits from your engine.

The technician may manually clean some of the deposits and also put a fuel additive in the fuel tank that will get rid of other deposits that are still in the fuel system

Keeping the air induction system clean is also important.  A technician can use a liquid cleaner specially designed for the job. Not only can this improve your fuel economy, it may also reduce exhaust emissions and help your engine last longer.

Most gasoline now contains detergents that help reduce or prevent these problems, but direct injection is now being used in more vehicles that are more susceptible to clogging. Ask your service advisor if your vehicle could benefit from fuel and air induction cleaning. 

KPS Princeton Garage
3860 NJ-27
Princeton, NJ 08540
732-297-9515

Put the Brakes On! (Brake Caliper Replacement)

Keeping your vehicle's brakes in top shape is one of the most important things you can do for your safety and those on the road with you. Most drivers know a little about brake pads and rotors but maybe not so much about another brake component called the calipers.

Disc brakes work by a mechanical system that presses your brake pads against discs called rotors (you can usually see these discs through your wheels). The friction stops your vehicle smoothly when everything is working the way it should.  The calipers use the hydraulic pressure of the brake fluid to apply the stopping power. 

After they've been on your vehicle for a while, the calipers can get stuck or wear out.  If calipers on one side of the vehicle work correctly and not on the other, you might feel a pull in one direction.  You might feel the same kind of pull if the caliper is stuck and is applying constant pressure.  You might hear scraping or squealing coming from a stuck caliper and you might smell burning on that side.  The friction from a caliper that's always applying pressure may cause that wheel to heat up, so after you've pulled your vehicle off the road safely, the wheel with the stuck caliper will might feel hotter than the others

Because there are many different components to the brakes, it's best to leave the diagnosis and repair to a trained technician. They will run each wheel through a series of tests and inspections that can pinpoint the problem.  Sometimes it involves more components than just the caliper that may need changing at the same time.

The best way to make sure your brakes will perform well is to is to have our service center perform regular inspections and follow the vehicle manufacturer's recommended service.  That way your brakes will be ready, willing and able when you call on them to put a stop to things.

KPS Princeton Garage
3860 NJ-27
Princeton, NJ 08540
732-297-9515

Bad Vibes (Disc brake rotor problems)

If you were to name the most important safety feature on your vehicle right now, what would your answer be? A lot of driving experts would agree that it’s your brakes.  Most newer vehicles use a well-engineered and efficient style of brakes called disc brakes. 

The name disc brakes comes from one of the components: a disc attached to the wheel hub that is squeezed by parts called calipers.  If you’ve ever ridden a bicycle with hand brakes, you probably have seen how they squeeze against the rim of the bike wheel to stop the bike. It’s similar to the way your vehicle’s calipers squeeze against the disc rotor, with added parts called brake pads attached to the calipers that are what create the friction and stop your vehicle.

Here’s why disc brakes need regular maintenance.  Over time, that friction creates wear and tear on the brake pads and the rotors, and you’ll start to see the signs.  Your brakes may have one of the 3 “S” sounds: squeaking, squealing, or scraping. The sound is usually the first sign of brake pad wear which can lead to rotor damage.  Soon you may notice a pulsating or vibration when you brake. That’s because your once smooth and straight rotor disc is warping from the heat generated from friction. Or it may be due to wear.  Eventually, your brakes will take a longer distance to stop your vehicle, and the rotors can have grooves carved into them.

When you start noticing any of these signs, it’s a good idea to have them inspected by a trained technician.  They will measure the rotor thickness, check wear patterns for grooves and heat discoloration, and see how much of the brake pads remain. They will also check to make sure all brake components are moving freely, check your brake fluid, and look for corrosion.

Most vehicle manufacturers require worn or damaged rotors to be replaced, not resurfaced. It’s all part of a complete brake job, replacing pads and the brake hardware parts along with the rotors. It reduces the chance of premature failure.

How often you will need your brakes serviced depends on the manufacturer’s recommendations, your driving habits, and the environment you live in.  Your service facility can recommend the best replacement parts based on those factors. 

Regular maintenance and attention are vital for keeping your brakes performing like they are designed to. Remember, your brakes are your vehicle’s most important safety feature.

KPS Princeton Garage
3860 NJ-27
Princeton, NJ 08540
732-297-9515